2019.07.17 Firmware changelog Professional v2 v.188 - "Toyota imo-imi v.3" algorithm was fixed ------------------------------------------------------------------------------------ 2019.07.16 Firmware changelog Professional v2 v.187 Smart Pro v2 v.193 Smart v2 v.193 Mini BT/ Mini v2 v.132 Light Pro/Light+ v.303 Light Pro v2 v.137 Light v2 v.276 v.292 - new model code 3131 Genesis G80 (model code was changed from 3224). CAN1 statuses: doors, trunk, hood, parking lights, handbrake, brake pedal, ignition, slave, trunk slave, engine start from an original remote control (3xLOCK). CAN1 commands: Central lock, hazard lights, unlocking trunk, original security system arming/disarming, command after remote engine start. ÑAN2 statuses: Parking, speed, RPM, fuel level (in liters). - 1417 Audi A4/A5/A7/A8/Q5/Q7/Q8 slave was optimized, hazard lights command was changed (blinking is performed only by the front lights). - 1417 Porsche Panamera/Cayenne slave was optimized, hazard lights command was changed (blinking is performed only by the front lights). - 1417 VW Touareg III slave was optimized, hazard lights command was changed (blinking is performed only by the front lights). - 3115 Genesis Coupe CAN1: skave mode was changed, Parking status was removed. CAN2: Parking status was added, RPM, brake pedal, speed, engine blocking. - 3129 Hyundai Santa FE comfort was added (use IMMO-KEY2 OUT). - 4224 Renault Arkana original security system disarming command was optimized. - 5224 Mercedes Sprinter door statuses were optimized. BT-series: - Bypass of an original immobilizer of Toyota Camry (XV70), Corolla XII (E210) with a key was added - select "Toyota imo-imi v3" bypass algorithm. - Algortihm 4 was added in the RHM hood lock control algorithm settings. This option is preferred for Bluetooth systems without tags. Locking: 1.When arming; 2.If disarmed- 15 seconds after switching ignition off. Unlocking: When switching on ignition and system is disarmed. ------------------------------------------------------------------------------------ 2019.07.03 Firmware changelog Professional v2 v.186 Smart Pro v2 v.191 Smart v2 v.191 Mini BT/ Mini v2 v.131 Light Pro/Light+ v.301 Light Pro v2 v.136 Light v2 v.276 v.291 DX50S v.291 New model codes: - 2219 Mitsubishi Outlander PHEV after 2012 y. - 2421 Mazda 3 2019 y. - 2626 Honda Jade (hybrid), Accord(hybrid) after 2015y. - 3416 Haval F7 2019 y. - 3921 Isuzu D-max 2018 y. - 4224 Renault Arkana 2019 y. Added support for: - 1734 Peugeout 508 2018 y. - 3232 Kia Soul (SK3) 2019 y. - 1244 Ford Explorer slave was optimized. - 1327 Opel Astra K status of neutral for cars with robotic transmission was added. - 1514 Volvo S60 fuel level in % was added. - 1617 LR Evoque central lock status was added. - 1732 Jeep Compass II slave was optimized for two-step unlocking, slave of original remote engine start was added; Validator buttons were added CAN1: on the central console "mute"/"screen off"/"rear defroster", on the steering wheel "up"/"down"/"left"/"right"/"ok". Light indication via CAN1 was added: single blink of turn indicators on the dashboard. - 2121 Toyota RAV4 Light path via CAN was added. - 2211 Mitsubishi Lancer trunk slave by keyless was removed. - 2215 Mitsubishi Colt RPM values were calibrated. - 2213 Mitsubishi L200, Pajero Sport RPM values were calibrated. - 2214 Mitsubishi Outlander III, Eclipse Cross I RPM values were calibrated. - 2217 Mitsubishi L200 V, Mirage VI; Nissan Dayz RPM values were calibrated. - 2218 Mitsubishi Pajero Sport; Fiat FullBack RPM values were calibrated ðà. - 3115 Genesis Coupe slave was added, parking status was added. - 3128 Genesis G90 CAN1: comfort command (deactivating oe alarm) was removed, the following commands were changed: command after remote engine start, arming/disarming oe alarm, unlocking trunk; brake pedal and parking status were removed. CAN2: speed status was changed, Parking, brake pedal were added, RPM status was changed. - 3213 Kia Mohave slave mode was changed. - 3220 Kia Ceed std.key engine start from an original remote was added. - 3225 KIA Soul std.key engine start from an original remote was added (only start). - 3226 Kia Sorento Prime Central lock control commands were optimized. - 3231 Genesis G70, KIA Stinger added: CAN1 validator buttons were added: button on the trunk, keyless sensors on door handles, left/right mirror adjustment buttons, "up"/"down"/"mute"/"voice" buttons on the steering wheel; Valet button via CAN1: right window regulator up button. CAN2: speed status was changed, RPM status was changed. - 3232 Kia Ceed power windows closing command was added for cars with automatic window regulators of all windows (use IMMO-KEY2 OUT). - 3232 Kia K900 comfort was added (use IMMO-KEY2 OUT). - 4312 Chrysler Town Country, Grand Voyager fuel level in liters was added. - 5117 BMW RPM values were calibrated. - 5119 BMW RPM values were calibrated. - 5223 Mercedes A-class 2018 ã. Slave was optimized. ------------------------------------------------------------------------------------ 2019.04.23 Firmware changelog Professional v2 v.171 Smart Pro v2/Smart v2 v.176 Mini v.261 Light Pro/Light+ v.291 Light Pro v2 v.126 Light v2 v.281 - new model code 2916 Geely Emgrand 7 2019 y. - new mode code 3130 Hyundai H350 2017y. - 4220 added support for Renault Lodgy 2012 y. - 1122, 1133 Audi A6/A8/S7 validator buttons were added: buttons on the driver door – driver, passenger, rear left and rear right window regulator up buttons. buttons on the steering wheel - OK, left, right, up, down, button on the cruise control lever or push cruise control lever away from you. - 1224, 1234 Ford Kuga II Engine pre-heater status via CAN1 was optimized. - 1523 Volvo XC90 CAN1: slave was optimized; CAN2: RPM status was optimized, Parking status was changed. - 1525 Volvo XC60 2018 slave for keyless was optimized. - 2319 Nissan Micra/Note/Tiida slave for two-step unlocking was optimized, engine start by 3xLOCK press was added. - 2416 Mazda CX-3/CX-5/CX-9/Axela III RPM values were calibrated. - 2417 Mazda 3/6 RPM values were calibrated. - 2911 Geely Emgrand 7 (2014-2019 ãã) RPM values were calibrated. - 2914 Geely Atlas OE security system control, unlocking trunk commands were optimized. Fuel level (in %) was added. - 3116 Hyundai Solaris, KIA Ceed/Rio RPM values were calibrated. - 3122 Hyundai Santa FE validator button was added: switch on rear window heating button. - 3129 Hyundai Santa FE CAN1: validator button were added: on the driver door – rear windows up button; VALET button via CAN was added: on the driver door – front right window up button. - 3218 Kia Sorento XM OE security system control commands were changed. - 3224 Kia Soul keyless II/Cerato III CAN1: OE security system control, unlocking trunk commands were optimized. CAN2: Fuel level (in %) was added. - 3225 Kia Soul std.key CAN1: ignition status was removed; CAN2: Fuel level (in %) was added, ignition and speed statuses were added. - 3226 Kia Sorento Prime CAN1: validator button were added: on the driver door – rear windows up button; VALET button via CAN was added: on the driver door – front right window up button. - 3227 Huyndai Tucson/Elantra/Sonata, Kia Optima/Sportage OE security system control, unlocking trunk commands were optimized. - 3412 Haval H6 RPM values were calibrated, bypass of original immobilizer was added (using IMMO-KEY, bypass algorithm - "HAVAL"). - 3413 Haval H2 RPM values were calibrated. - 3414 Haval H8 RPM values were calibrated. - 3414 Haval H9 RPM values were calibrated, bypass of original immobilizer was added (using IMMO-KEY, bypass algorithm - "HAVAL"). - 3613 Chery Tiggo V Arming/Disarming OE alarm commands were added. - 4217 Renault Kaptur Command after remote engine start was optimized to allow the keyless entry system to be functioning. - 4315 Jeep Wrangler Slave was added in CAN2. - 5211 Mercedes SLC 2019 y. VALET button via CAN was added: left joystick on the steering wheel – "down" button. BT-series: - idle speed recognizing algorithm was optimized: it is not required to record idle speed in the programming menu for the most of cars. - Professional v2 GSM-modem was optimized: time for communication recovery was minimized after a long stay of the system in the no GSM connection zone. - Light Pro v2 added support for bypass of Mercedes, Lifan. ------------------------------------------------------------------------------------ 2019.03.27 Firmware changelog Professional v2 v.166 Smart Pro/Smart Pro v2 v.172 Smart v2 v.172 Mini BT v.258 Light Pro/Light+ v.286 Light v2 v.276 New cars: - new model code 1736 Opel Crossland X after 2018 y. - new model code 2714 Suzuki Vitara II Restyling after 2018 y. - 1723 Opel Combo 2011-2017. - 1015 Skoda Fabia windows closing command was added via LIN(use IMMO-KEY1 wire). - 1115,1118 VW Polo Sedan windows closing command was added via LIN(use IMMO-KEY1 wire). - 1115 VW Amarok windows closing command was added via LIN(use IMMO-KEY1 wire). - 1115,1138 VW Transporter/Caravella/ windows closing command was added via LIN(use IMMO-KEY1 wire). - 1133 Audi A6 status of engine pre-heater and control engine pre-heater commands were added (for 3xCAN). - 1138 VW Multivan/Caravella/Transporter CAN2, CAN3 Engine blocking via CAN was added (diesel). - 1221,1231 Ford Focus III Remote engine start via CAN command was optimized. - 1224,1234 Ford Kuga II Remote engine start via CAN command was optimized. - 1317 Chevrolet Captiva Central lock command was optimized. - 1618 LR Range Rover/Vogue III re. CAN2 tachometer status via CAN was changed. - 1619 LR Velar Turn off ACC command was optimized. - 1912 Lada Vesta Hazard lights blinking was added in the Arming/Disarming OE security system command. - 2211 Mitsubishi Lancer Trunk slave was added. - 2218 Mitsubishi Pajero Sport Engine start using OE remote control (3xLOCK press) - 2316 Nissan Note/Tiida std.key Bypass of an original immobilizer via CAN was added (Clone). - 2319 Nissan Note/Tiida keyless Bypass of an original immobilizer via CAN was added (Clone). - 2711 Suzuki Grand Vitara/Splash/Swift/SX4 RPM values were calibrated. - 2711 Fiat Sedici RPM values were calibrated. - 2712 Suzuki Kizashi/Swift V re./Grand Vitara II re.2 RPM values were calibrated. - 2713 Suzuki SX4 II/Vitara II/Jimny IV RPM values were calibrated. - 3129 Hyundai Santa FE new commands were added: closing windows (passenger windows only, use analog connections for driver window), folding mirrors. - 3231 Kia Stinger Turn off ACC command was changed, fuel level was changed to liters. - 3231 Genesis G70 Turn off ACC command was changed, fuel level was changed to liters. - 5217 Mercedes C(W205) Slave mode was optimized (for right-hand-drive cars). - Renault Logan I, Duster I, LADA Largus, Nissan Almera III/Terrano III Bypass of an original immobilizer algorithm was optimized. - DX90 Default values of the “F” algorithm of accelerometer was changed. BT-series: - Algorithm for detecting loss of communication with a DMS100BT was optimized. - Normally closed logic of RHM input was fixed. - Activating of “Prohibit disarming when a tag is absent” function for Toyota/Lexus cars was changed if Slave disarming is enabled. If at least one radio tag or D-030 remote control (and it is used as a tag) or a mobile phone (and it is used as a tag), then “Prohibit disarming when a tag is absent function” will be activated automatically. - Support for PS-331BT siren was added (Update of BT-modem firmware is also required). ------------------------------------------------------------------------------------ 2019.02.27 Firmware changelog Professional v2 v.156 Smart Pro/Smart Pro v2 v.169 Smart v2 v.169 Mini BT v.257 Light Pro/ Light +.281 Light v2 v.274 New cars: - 2915 Geely Emgrand X7_NL4 2019 y. - 3614 Chery Tiggo 2 (2017 y.) - 3615 Chery Tiggo 3 (2014 y.) - 5220 Mercedes S(W220) facelift. 2002-2005y. - 5224 Mercedes Sprinter (907) 2019y. - 3232 Kia K900 2019 y. - 1129 Skoda Kodiaq handbrake status was optimized. - 1216,1221,1236,1242 Ford Focus III control over engine pre-heater was optimized. - 1224,1234 Ford Kuga II engine start via CAN and Switch off ACC via CAN commands were optimized. - 1231 Ford Focus III control over engine pre-heater was optimized; VALET button via CAN1: button on the gear selector. - 1241 Ford Mondeo (2017 y.) Engine start via CAN command was added (for cars with original remote engine start function). - 1244 Ford Explorer (2017 y.) Engine start via CAN command was added (for cars with original remote engine start function). - 1615 Land Rover Discovery IV 2010 y. code immobilizer buttons via CAN2 were added: "cruise res", "cruise CAN". - 1616 Land Rover Sport 2012 code immobilizer buttons via CAN2 were added: "cruise set+", "cruise res", "cruise -", "cruise CAN". - 1732 Jeep Compass 2018 Parking status via CAN1; hood status, arming/disarming OE alarm via CAN2. - 1734 Citroen Space Tourer, Peugeot Traveller Fuel level via CAN2 (in liters). - 1912 Lada Vesta Unlock a trunk command was added. - 1913 Lada X-Ray Unlock a trunk command was added. - 2218 Mitsubishi Pajero Sport Trunk slave was optimized. - 2328 Renault Koleos 2008-2016 Bypass via CAN1 is added (CLONE is not required). - 2332 Nissan Teana VALET button via CAN was removed (button on the gear selector). It was not stable on some car trims. - 2611 Honda Accord IX/Civic IX,X/Pilot II/CR-V IV/ Stepwgn IV/Accord VI/H-RV II/Jazz III/Fit III/Vezel/CR-V II tachometer RPM values were calibrated. - 2611 Acura RDX II/TLX I/RL II/TL/TSX/ZDX tachometer RPM values were calibrated. - 3125 Hyundai Creta Central lock commands, control OE alarm commands were optimized (only for cars with START/STOP button). - 3129 Hyundai Santa FE Trunk control, Switch off ACC were optimized. - 3218 Kia Sorento II rest. (XM) äîáàâëåíû êíîïêè íà ðóëå äëÿ êîäîâîãî èììîáèëàéçåðà ïî CAN2: RES+, SET-, CANCEL, CRUISE. Äîáàâëåíà Ñâåòîâàÿ èíäèêàöèÿ 1 ïî CAN2: ìîðãàíèå óêàçàòåëÿìè ïîâîðîòîâ íà ïðèáîðíîé ïàíåëè. - 3229 Kia Cerato 2016-2019 Comfort commands was added (deactivate OE alarm), Switch off ÀÑÑ via CAN was added(door opening simulation). - 3231 Kia Stinger commands were changed: trunk control, arming/disarming OE alarm, switch off ÀÑÑ. Comfort command was removed (deactivate OE alarm). - 3231 Genesis G70 commands were changed: trunk control, arming/disarming OE alarm, switch off ÀÑÑ. Comfort command was removed (deactivate OE alarm). - 3232 Kia Ceed, Cerato commands were optimized: trunk control, switch off ÀÑÑ. - 4219 Renault Koleos, Kadjar Fuel control was optimized (in liters), outside temperature status was added, trunk control command was added. - 5117, 5119 BMW F,G-series Engine blocking via CAN2 command was optimized for 5.0L engines. - 5212 Mercedes Vito, Viano immobilizer bypass algorithm was optimzed. - 5217 Mercedes S (W222)/C (W205)/GLC (X253) tachometer RPM values were calibrated. - 5223 Mercedes E(W213) doors statuses was optimized, tachometer RPM values were calibrated. - 5223 Mercedes E(W213) Slave of original remote engine start was added. ÂÒ-series: - GSM-modem was optimized. - Slave-mode for Toyota/Lexus cars was optimized (for systems without tags). - DMS100BT zone can be assigned as any input in the inputs table: "DMS1","DMS2". ------------------------------------------------------------------------------------ 2019.02.01 Firmware changelog Professional v2 v.154 Smart Pro/Smart Pro v2 v.168 Smart v2 v.168 Mini BT v.256 Light Pro/ Light +.278 Light v2 v.273 - new model code 1525 Volvo XC60 2018 y. - 3227 Kia Sportage std.key trunk slave was optimized, engine start using an original key added. - 4111 Cadillac Escalade front windows closing and folding mirrors commands were added; validator buttons on the right side of the steering wheel: Up, Answer a call, Down (Hang up), Right. - 2335 Nissan Qashqai/X-Trail/Pulsar Valet button via CAN was removed (button on the gear selector). It was not stable on some car trims. BT-series: - For all Toyota/Lexus cars: “Prohibit disarming when the tag is absent” function is automatically enabled if Slave mode is used. - Switch off ACC after engine stop function was optimized (CAN and Analogue). - Program neutral/Turbotimer/Keeping ignition on functions were optimized for BMW bypass module - Lifan bypass algorithm via CAN2 was optimized. ------------------------------------------------------------------------------------ 2019.01.28 Firmware changelog Professional v2 v.153 Smart Pro/Smart Pro v2 v.167 Smart v2 v.167 Mini BT v.254 Light Pro/ Light +.277 Light v2 v.272 - 2932 Lifan Solano (from 2016y.) bypass of original immobilizer via CAN was added. - 2933 Lifan Myway (from 2016 y.) bypass of original immobilizer via CAN2 was added. - 2934 Lifan X70 (from 2018 y.) bypass of original immobilizer via CAN was added. - 2935 Lifan Murman (from 2016 y.) model code was changed, bypass of original immobilizer via CAN2 was added. New cars: - 2625 Honda Grace 2014-17 y. - 3415 Haval H6 Coupe 2017 y. - 1417 Audi A8 (D5) 2017 y. - 3217 Hyundai H1 2018 y. - 3217 KIA Vengà std.key 2011-14 y. and KIA Vengà std.key (facelift) 2014-18 y. - 3217 Hyundai Getz facelift 2005-2011 y., Tachometer status was added. - 1227 Ford Fiesta Slave mode is optimized. - 1724 Alfa Romeo 159 slave was changed. - 1733 Peugeot 3008 ignition status is moved to CAN2, windows closing command via CAN1 was optimized. - 2335 Nissan Qashqai/X-Trail/Pulsar Valet button via CAN was added; Light indication 1 via CAN was added. - 2416 Mazda CX3/CX5/CX9 statuses of buttons on the new steering wheel were optimized. - 2521 Subaru Forester slave mode was optimized. - 2713 Suzuki Vitara slave mode was optimized. - 3122 Hyundai Santa FE CAN2 - statuses of buttons were optimized. - 3125 Hyundai Creta Parking lights blinking command was replaced with the hazard lights blinking command. - 3126 Hyundai Solaris (start-stop) Parking lights blinking command was replaced with the hazard lights blinking command. - 3126 Kia Rio, Picanto (start-stop, radio-key) Parking lights blinking command was replaced with the hazard lights blinking command. - 3127 Hyundai Solaris (std key) Parking lights blinking command was replaced with the hazard lights blinking command. - 3127 Kia Rio (std. key) Parking lights blinking command was replaced with the hazard lights blinking command. - 3227 Kia Optima Valet button via CAN was added. BT-series: - Engine start using an original key (3xLOCK to start) is unavailable for 20 sec after arming. - Factory logic of DI04 operation was changed: A pulse to R1 relay is sent after activating VKEY during remote engine start procedure. It is required for initialization of an original key in a car. ------------------------------------------------------------------------------------ 2019.01.25 Firmware changelog Smart Pro/Smart Pro v2 v.166 Smart v2 v.166 Light Pro/ Light +.276 Light v2 v.270 Bypass of LIFAN cars was added: - 2932 Lifan Solano (2016 y.) bypass of original immobilizer via CAN was added - 2934 Lifan X70 (2018 y.) bypass of original immobilizer via CAN was added - 2933 Lifan Myway (2016 y.) bypass of original immobilizer via CAN2 was added CAN2 connection points: OBD: 6 - CAN-H, 14 - CAN-L - 2935 Lifan Murman (2016 y.) model code was changed, bypass of original immobilizer via CAN2 was added. CAN2 connection points: OBD: 6 - CAN-H, 14 - CAN-L Settings: “Keyless bypass option” -> “Bypass via CAN” Learning procedure: Enter the level 17 -> LED is Green -> Turn on the ignition -> LED is blinking green -> Turn off the ignition -> Press the VALET button once -> Turn on the ignition -> Turn off the igntion. ------------------------------------------------------------------------------------ 2018.12.28 Firmware changelog Professional v2 v.151 Smart Pro/Smart Pro v2 v.166 Smart v2 v.166 Light Pro/ Light +.276 Light v2 v.270 - 1136 VW Tiguan Heating of the front seat command was added (“Additional function via CAN”), Mileage and speed via CAN were added. CHANGES IN ALGORTIHMS - code immobilizer function was optimized - GSM/GPRS operation was optimized ------------------------------------------------------------------------------------ 2018.12.20 Firmware changelog Professional v2 v.150 Smart Pro/Smart Pro v2 v.165 Smart v2 v.165 Mini BT v.253 Light Pro/ Light + v.275 Light v2 v.270 - 1136 VW Tiguan “Additional function via CAN” was added: heating of the rear window, steering wheel and front window. - 3232 Kia Ceed, Cerato Arming/Disarming OE alarm commands were changed. Comfort command (deactivating OE alarm) was removed, unlocking a trunk command was changed, Command after remote engine start was changed. - 3129 Hyundai Santa FE Arming/Disarming OE alarm commands were changed. Comfort command (deactivating OE alarm) was removed, unlocking a trunk command was changed, Command after remote engine start was changed. - Lexus LS460 2006-2009 model code was changed to 2117 - 2117 Lexus LS460 2006-2009 Enable/Unable keyless-go via CAN commands were added - 4219 Renault Koleos Command after remote engine start was added - 3125 Hyundai Creta Command after remote engine start was added BT-series: - Immobilizer algorithm was optimized - DTMF commands for 3G modems was optimized - A new function to deactivate immobilizer and(or) code immobilizer was added, Turn on the ignition and enter the “Secret code” from the owner’s personal card using the VALET button. The immobilizer functions will be being deactivated by the time the ignition is turned off. ------------------------------------------------------------------------------------ 2018.12.18 Firmware changelog Professional v2 v.148 Smart Pro/Smart Pro v2 v.163 Smart v2 v.163 Mini BT v.251 Light Pro/ Light + v.273 Light v2 v.268 New cars - 2624 Honda N-WGN 2013-2016 y. - 5119 BMW X4(G02) 2018 y. - 4317 Chrysler Pacifica ñ 2016 y. - 1417 Audi Q8 2018 y. - 1913 Lada X-Ray blocking via CAN was added - 1911 Lada Granta, Kalina, Priora blocking via CAN was added CAN (engine start blocking). - 1619 LR Velar 2018 Command after remote engine start was added - 1115 VW Caravella/Multivan/Transporter 2009-2015, Polo 2010-2014, Polo Sedan 2010-2015, Polo Sedan restyling 2015-2018, Amarok 2009-2018, Beetle 2011-2018 3xLOCK start using original key was added - 1136 VW Tiguan Windows closing command was added - 1417 Audi A4,A5,A7,Q5,Q7; Porsche Panamera, Cayenne; VW Touareg RPM values via CAN1 was calibrated. - 1417 VW Touareg, Audi Q7 Preheater control commands were changed; Connection points to CAN2 (CAN3) were changed. CAN2(CAN3 for Professional v2): red connector in the left kick-panel: Prurple CAN-H, Orange/Brown CAN-L - 1115 Skoda Rapid 2012-2016 3xLOCK start using original key was added - 1015 Skoda Fabia 2006-2014 3xLOCK start using original key was added - 1136 Skoda Superb Windows closing command was added - 1129 Skoda Octavia A7 Arming OE alarm command was modified. - 4317 Jeep Grand Cherokee IV restyling/restyling2 (2013 - 2018) Slave of original remote engine start was added - 4321 Jeep Cherokee 2014-2018 Ignition status was optimized, RPM values was calibrated, Slave of original remote engine start was added, Engine start/stop via CAN commands were added (the function must be activated by diagnostic tools). - 4315 Jeep Wrangler CAN2 was added: hood status, Arming/Disarming OE alarm commands were added. CAN2 connection points – behind the glove compartment, CAN-High - gray, CAN-Low - yellow - 2416 Mazda CX3,CX5,CX9 Slave mode was optimized (original automatic rearming) - 2623 Honda StepWGN V 2015-2017 Slave mode and trunk status were optimized - 4317 Dodge RAM 2013-2018 Slave of original remote engine start was added, RPM values were calibrated - 2017 Seat Alhambra 2010-2018 Slave of sliding door was optimized. - 1234 Ford Kuga2 trunk slave was optimized. - 2321 Infiniti QX50/70/80 Commands to enabled/Disable OE keyless-go were optimized - 2321 Nissan Patrol, Murano, Tiida, Juke Commands to enabled/Disable OE keyless-go were optimized - 2333 Nissan Pathfinder Commands to enabled/Disable OE keyless-go were optimized - 2336 Infiniti Q50/60/70 Commands to enabled/Disable OE keyless-go were optimized - 2337 Infiniti QX60 Commands to enabled/Disable OE keyless-go were optimized - 5211 Mercedes C(W204), CL(C216), E(C207), E(W212), S(W221), SLK(R171), GLK(X204), CLS(W218), SLK(R172) Fuel level via CAN was optimized. - 1224 Ford Kuga2 Disarming OE alarm via CAN was optimized. - 1224, 1234 Ford Kuga2 Ignition status and Engine start via CAN2 function were optimized (original time limit was removed). - 1221, 1231 Ford Focus3 Ignition status and Engine start via CAN2 function were optimized (original time limit was removed). - 5218 Mercedes Sprinter (909) RPM values were calibrated - 2521 Subaru Forester PTS CAN1:trunk status was added, slave mode was optimized; CAN2:front windows closing command was added - 2521 Subaru XV PTS CAN1: slave mode was optimized; CAN2:front windows closing command was added - 2415 Mazda CX7 RPM values were calibrated CHANGES IN ALGORTIHMS For all systems: - Remote engine start with engine pre-heater activation was optimized. BT-series: - Learning procedure for VW, Audi, Skoda, Seat was improved. ------------------------------------------------------------------------------------ 2018.11.14 Firmware changelog Professional v2 v.147 Smart Pro/Smart Pro v2 v.162 Smart v2 v.162 Mini BT v.250 Light Pro/ Light + v.272 Light v2 v.267 New cars: - 7121 Ferrari 458 Speciale 2009-2015 y. - 1417 Audi A7 2018 y. - 1617 Jaguar E-Pace 2018 y. - 2521 Subaru Forester pts. 2018 y. - 5112 BMW E60 Command after remote engine start was optimized - 1212 Ford Fusion Parking status via CAN2 was added. CAN2 connection points: OBD: 6 - CAN-H, 14 - CAN-L - 1313 Chevrolet (Aveo, Camaro, Cruze, Malibu Orlando, Cobalt), Opel (AStra J, Insignia, Meriva, Zafira C) RPM values via CAN were calibrated - 1318 Chevrolet Camaro V RPM values via CAN were calibrated - 1324 Cadillac (SRX II, ATS, XT5), Chevrolet (Camaro VI, Traverse II), Opel Insignia Country Tourer RPM values via CAN were calibrated - 1327 Opel Mokka, AStra K RPM values via CAN were calibrated - 4113 Cadillac Escalade IV, Chevrolet Tahoe IV RPM values via CAN were calibrated - 1911 Lada Granta remote engine start procedure was optimized to exclude OE alarm triggering - 5216 Infiniti Q30, QX30 Engine start using original key was added, slave mode when ignition is ON was added. - 1912 Lada Vesta Engine blocking via CAN was added, RPM values via CAN were calibrated - 1913 Lada X-Ray RPM values via CAN were calibrated - 4211 Renault Fluence, Laguna III RPM values via CAN were calibrated - 4212 Megane III, Scenic III RPM values via CAN were calibrated - 4213 Renault Latitude RPM values via CAN were calibrated - 2623 Honda StepWGN V 2015-2017 Slave mode via CAN was optimized - 3217 Hyundai Santa Fe 2006-2012, Solaris 2010-2016, H1 2007-2017; Kia Ceed 2006-2012, Rio 2011-2015, Sorento 2012-2017 RPM values via CAN were calibrated - 1115 VW Caravella/Multivan/Transporter 2009-2015, Polo 2010-2014, Polo Sedan 2010-2015, Polo Sedan restyling 2015-2018, Amarok 2009-2018, Beetle 2011-2018 RPM values via CAN were calibrated - 1115 Skoda Rapid 2012-2016 RPM values via CAN were calibrated - 1015 Skoda Fabia 2006-2014 RPM values via CAN were calibrated FOR SMART/SMART PRO V2: Use IMMO-KEY1 to control Webasto, Eberspacher and Use IMMO-KEY1 as LIN functions were added. - BT-series: - Doors control was optimized during command after remote engine start executing. - GPRS operation was optimized - Work with Pandora Eye Pro was optimized (Pandora Eye Pro must be updated to 1.08 version) ------------------------------------------------------------------------------------ 2018.10.26 Firmware changelog Professional v2 v.145 Smart Pro/Smart Pro v2 v.161 Smart v2 v.161 Mini BT v.249 Light Pro/ Light + v.271 Light v2 v.266 New cars: - 1328 Opel Adam - 4315 Dodge RAM 2019 y - 1138 VW T6 trunk slave was optimized, engine start using an original key was added - 1226 Ford Transit Slave mode was optimized ------------------------------------------------------------------------------------ 2018.10.18 Firmware changelog Light Pro/ Light +.271 Light v2 v.266 - 1127 VW Passat B7/CC Valet button via CAN was added: driver window regulator up button - 1127 VW Passat B6 Valet button via CAN was added: driver window regulator up - 1417 Audi A5 2016-2018 Valet button via CAN was added: driver window regulator up - 1417 VW Touareg 2018 Valet button via CAN was added: driver window regulator up - 1131, 1133 VW Touareg 2011-2018 Valet button via CAN was added: driver window regulator up - 1234 Ford Kuga II Valet button via CAN was added: button on the gear selector - 2114 Toyota LC Prado 150 2009-2017 Valet button via CAN was added: gear selector to the right - 2332 Nissan Teana button via CAN was added: button on the gear selector - 3232 Kia Ceed, Cerato Unlocking a trunk command was optimized - 5223 Mercedes E(W213) Arming slave when ignition is on was removed. - 3232 Kia Ceed, Cerato Trunk slave was optimized - 3129 Hyundai Santa FE Trunk slave was optimized - 2522 Subaru Outback Trunk slave was optimized - 1519 Volvo XC60 Parking, Parking lights and fuel level statuses were corrected. - 3414 DW Hower H3 doors statuses were added (only when ignition is on), trunk (only when ignition is on), validator (clutch pedal) - Pandora Light Pro/Light+ Mercedes bypass was added. - Pandora Light v2 radio channel was optimized BT-series: - Beeper sound signals were optimized ------------------------------------------------------------------------------------ 2018.10.04 Firmware changelog Professional v2 v.143 Smart Pro/Smart Pro v2 v.159 Smart v2 v.159 Mini BT v.247 Light Pro/ Light + v.268 Light v2 v.260 New Cars: - 2350 Infiniti QX50 2018 y. - 3521 FAW X80 2018 y. - 2416 Mazda CX3,CX5,CX9 fuel level was changed to liters - 2417 Mazda 3,6 fuel level was changed to liters - 3232 Kia Ceed 2019 unlocking a trunk command was added - 1226 Ford Tourneo Custom, Transit Fuel level was corrected BT-series: - 1133,1122 Audi A6/A6 allroad/A7 2010-2018 Valet button via CAN was added: driver window regulator up button - 1127 Audi Q3 restyling 2015-2018 Valet button via CAN was added: driver window regulator up button - 1417 Audi Q5 2017-2018 Valet button via CAN was added: driver window regulator up button - 1129 Skoda Kodiaq Valet button via CAN was added: driver window regulator up button - 1129 Skoda Octavia Valet button via CAN was added: driver window regulator up button - 1129 Skoda Rapid Valet button via CAN was added: driver window regulator up button - 1136 Skoda Superb Valet button via CAN was added: driver window regulator up button - 1115 VW Polo Sedan Valet button via CAN was added: driver window regulator up button - 1138 VW Multivan/Caravella (T6) Valet button via CAN was added: driver window regulator up button - 1128 VW Golf VII Valet button via CAN was added: driver window regulator up button - 1136 VW Passat (B8) Valet button via CAN was added: driver window regulator up button - 1124 VW Passat B7/CC Valet button via CAN was added: driver window regulator up button. Validator button was added - passenger window regulator up button on the driver door. - 1417 Audi Q7 CAN1: Valet button via CAN was added: driver window regulator up button. CAN3: control and status of OE Webasto were added (in the harness on the right side of the motor space: gray - CanHigh, orange-brown - CanLow) - Duration of control impulse of engine pre-heater options were added: 1sec., 2.5sec. - Clone Procedure via Pandora BT was added. - Enter/Exit programming menu function via Pandora BT was added. - Detecting BT radio tag algorithm was optimized ------------------------------------------------------------------------------------ 2018.09.25 Firmware changelog Professional v2 v.142 Professional/Elite v.324 Smart Pro/Smart Pro v2 v.158 Smart v2 v.158 Mini BT v.246 Light Pro/ Light +.267 Light v.215 Learning procedure for Audi, VW, Skoda, Seat cars was changed. For KEY cars it is required to turn on ignition 3 times. For PTS cars it is required to turn on ingtion 2 times. Learning procedure for Renault, Nissan, Lada cars was changed. New procedure works faster. It requires to turn on ignition 2 times.: RENAULT: Clio(2016-2018, code 4217), Dokker(2017-2018, code 4220), Duster II (2015-2018, codes 4215, 4220), Kadjar (2016-2018, code 4219), Kaptur (2016-2018, code 4217), Koleos II(2016-2018, code 4219), Logan II (2013 – 2018, code 4215), Sandero II stepway (2013-2018, code 4215), Twingo III (ñ 2014, code 4215) LADA: Vesta (2015-2018, code 1912), X-Ray (2015-2018, code 1913) NISSAN: Pulsar IV C13 (2014-2018, code 2335), Qashqai II (2014-2018, code 2335), Terrano II (2016-2018, code 4215), X-trail III (2015-2018, code 2335) Mercedes Citan (2012-2018, code 2316) Smart Fortwo (2015-2018, code 4215) Changes in CAN protocols: - new code 6114 Ssang Yong Tivoli 2018 - Nissan Leaf code was changed to 2349. New statues: battery level, SOH, charging status, battery temperature; New commands: keyless block, unlock trunk (unlock charger flap), ------------------------------------------------------------------------------------ 2018.09.17 Firmware changelog Professional/Elite v.323 Professional v2 v.141 Smart Pro/Smart Pro v2 v.156 Smart v2 v.156 Mini BT v.245 Light Pro/Light + v.264 - 5111 BMW a bug with the Slave mode from the previous version was fixed - 3129 Hyundai Santa FE 2018 y. Parking status was moved to CAN2, Central lock commands was added, fuel level (%) was added. CAN2 connection was changed: orange - CAN-H, green - CAN-L - 3232 Kia Ceed, Cerato Central lock commands were added, Parking light blinking command was replaced with turn lights blinking command BT-series: - Accelerometer algorithm “M” was optimized (sensitivity for detecting road roughness was decreased) ------------------------------------------------------------------------------------ 2018.08.27 Changelog Professional v.139 Smart Pro/Smart Pro v2 v.155 Smart v2 v.155 Mini BT v.244 Light Pro/Light+ v.263 - new code 3129 Hyundai Santa FE 2018 ã. - 3122 Hyundai Santa FE äîáàâëåíà êíîïêà Valet ïî CAN. - 1616 LR Vogue Valet button via CAN was added. - 2121 Toyota Alphard Mirrors folding and hatch locking commands were added (for BT systens). - 2141 Toyota, Lexus Mirrors folding and hatch locking commands were optimized. - 3125 Hyundai Creta remote engine start by an OE key was optimized. - 3232 Kia Cerato 2018y. added - 5122 Rolls-Royce Wraith 2013y. added - 2321, 2333, 2336, 2337 Infiniti command to unlock OE keyless was changed. BT-systems: - New programming level was added. Level 13 – Emergency deactivation of validator. The secret PIN-code is required. - New function was added: "VALET button via CAN" (Depends on a car, information is in the AlarmStudio). New setting that allow to enable this function was added in the AlarmStudio. - Delay before blocking by Validator was added (Blocking will occur not immediately after turning on the ignition, but after delay that can be set in the settings). - Voice interface was optimized. ------------------------------------------------------------------------------------ 2018.08.14 Firmware changelog Professional v.322 Smart Pro v.154 Mini BT v.243 Light Pro/Light+ v.262 Light v.212 - new code 1139 Porsche 911 VII restyling after 2015y. - new code 3232 Kia Ceed 2018 y. - 1125, 1116, 1122, 1131,1133,1412,1416 RPM values was calibrated. - 1417 VW Touareg 2018 y added. - 2713 Suzuki Jimny 2018y added - 1617 Land Rover Vogue 2017y. Slave optimized. - 2316 Mercedes Citan after 2012 y. added - 3414 Haval H8/H9 fuel level (liters) was added - 2144 Toyota Camry pause of 3 sec. between blinking hazard lights and disarming oe alarm was added - 1234,1224,1216,1221,1223,1231,1236,1242,1271,1271 Ford RPM values was calibrated - 3122 Hyundai Santa FE door opening simulation was added into the “Comfort” commands - 4315 Jeep Wrangler 2019y. pts added - 2416, 2417 Mazda CX5/3/6 Engine start blocking was added (“Engine blocking via CAN”). - BT-systems: - Accelerometer algorithm “f” was optimized. - Bypass of original immobilizer was added for Hyundai Getz 2005-2011, Elantra 2006-2011 y, Kia Sorento 2002-2006 y. - select "UAZ bypass" option (CLONE is required). - Light, Professional/Elite engine start using an OE remote control was optimized. ------------------------------------------------------------------------------------ 2018.07.13 Èñòîðèÿ èçìåíåíèé â âåðñèÿõ ïðîøèâîê Smart Pro v.152 Mini BT V.242 Light Pro/Light+ v.260 - 2144 Toyota Camry fuel level was optimized, Blocking via CAN for 2.0L, 3.5L engines was added - 1319 Chevrolet Aveo validator buttons (RES+, RES-) were added - 2214 Mitsubishi Outlander III front hood status was added (there is no original hood switch, but there is a connector on the radiator. If an additional switch is connected to this connector, its status will be present in CAN-bus; commands were optimized. - 5223 Mercedes E(W213) OE alarm control commans were optimized; slave function for ignition is on was added; remote engine start by OE remote control was added, mileage was added. - 1226 Ford Tourneo Custom, Transit V fuel level mileage were adde - 1224 Ford Kuga OE alarm disarming command was fixed BT-series: - “Loosing/detecting” tag even was optimized. - Turbotimer / program neutral bug was fixed ------------------------------------------------------------------------------------ 2018.07.12 Changelog Professional/Elite v.321 Smart Pro v.151 Mini BT V.241 Light Pro/ Light+ v.259 Light v.211 New cars: - 6211 JAC iEV7S 2018 y. - 4322 Jeep Renegade 2018 ã. - 1732 Jeep Compass 2018 y. - 1524 Volvo S60 2018 y. - 1241 Ford Eco Sport 2018 y. - 1245 Ford Fiesta 2018 y. - 1735 Fiat Doblo II restyl. from 2015 y. - 4215 Daicia Duster II from 2017 y. - 4317 Maserati Levante - 4223 Renault Grand Scenic III facelift 2 (2013-16 y.) - 4215 Renault Twingo III 2014 y. - Ford Tourneo Custom (rest.) 2017 y. model code was changed from 1241 to 1245 - Renault Megane IV. model code was changed from 4218 to 4219 (bypass of immobilizer via CAN was added) - 2141 Toyota Prado 2.7 std.key 2018 ã. bypass of immobilizer was added - imo-imi new algorithm - 2141 Toyota/Lexus "Light indication 1 via CAN" was removed - 1111 Hyundai Accent (Tagaz) 2001-2012 yy. Bypass of original immobilizer was added (UAZ Algorithm, brown wire on the immobilizer unit under the steering wheel) - 4212 Renault Megane 3 RPM status was optimized - 4217 Renault Captur mileage via CAN was added - 3226 Kia Sorento Prime comfort command was optimized (the command arms OE alarm) - 2914 Geely Atlas OE alarm disarming command was fixed - 2522 Subaru Outback 2018 Command after remote engine start was added (turns off the light and locks the steering wheel) - 1614 Land Rover Sport 2008 y. Slave mode was optimized - 1523 Volvo XC90 CAN2: ignition status was added. - 2325 Infiniti FX35 2006 comfort command was added. - 5213 Mercedes G(W463) 2004-204 validator buttons were added: Up, Down, Vol+, Vol-. Bypass of immobilizer was added - 1733 Peugeot 3008 slave was optimized (keyless) - 1734 Citroen Space Tourer slave was optimized (keyless) - 2141 Toyota LC200, Alphard Statuses of open windows and hatch were added. (commands will not be performed if windows/hatch are close). - 3116 Hyundai Solaris Engine block bug was fixed - 2335 Nissan X-Trail Bypass of immobilizer algorithm was optimized to eliminate oe alarm triggering. - 2335 Nissan X-Trail, Qashqai RPM values were optimized For BT-systems: - A simplified procedure for entering the main owner’s number was added: - disarm the system, call the system number, wait for the answer (if you call not from the owner’s phone, sit in the car, enter the “Guest PIN-code” – factory preset is 1-2-3-4), press and hold the button on a radio tag for 2 seconds, release the button. - the system will remember the phone number of the incoming call as the owner's number and will repeat it, end the call. - Algorithm of switching on engine blocking by the selector position was optimized. - BMW Bypass support was added(bypass of control access system CAS3): BMW 1 (E82/E88/E82), 3 (E90/E91/E92/E93), 5 (E60/61), 6 (E63/E64), X1 (E84), X5(E70), X6(E71/E72), Z4 (E89) MINI Cooper (2007-2013), Cooper Convertible (2008-2013), Clubman (2008-2013), Coupe/Roadster (2012-2013) ------------------------------------------------------------------------------------ 2018.05.28 Changelog Professional/ELite v.319 Smart Pro v.149 Mini BT V.240 Light Pro/Light+ v.258 New cars - 1136 VW Teramont 2018 y. - 1417 Porsche Cayenne 2018 y. - 5119 BMW X2(F39) 2018 y. - 1619 Land Rover Velar 2018 y. - 1324 Chevrolet Traverse 2018 y. - 3231 Genesis G70 2018 y. - 4215 Smart Fortwo from 2015 y. - 2214 Mitsubishi Eclipse Cross c 2017 y. - 3911 Dongfeng AX7 2018 y - 4411 Zotye T600 2018 y. - 2934 Lifan X70 2018 y. - Toyota Camry V70 2018 y. model code was changed to 2144 - Seat Alhambra 2010-2018 ã. model code was changed to 2017, slave was optimized for cars with START/STOP button. - 1241 Ford Mondeo trunk slave was optimized. - 1244 Ford Explorer trunk slave was optimized, original remote engine start slave. - 1224, 1234 Ford Kuga2 remote engine start/stop command via CAN was added (original remote engine start function must be activated). - 1224, 1234 Ford Kuga2 ignition status was changed, original remote engine start slave was added. - 1221, 1231 Ford Focus3 (facelift) remote engine start/stop command via CAN was added (original remote engine start function must be activated). - 1733 Peugeot 3008 trunk slave was added. - 1619 Land Rover Sport 2018 y. parking status was added, validator buttons: SET+, SET-, RESUME, RPM values was added, CAN2 connection points were changed. - 1912 Lada Vesta SW trunk slave was optimized. - 2141 Toyota Fortuner slave when ignition is on was added. - 2211 Mitsubishi Outlander fuel level status was optimized. - 2218 Mitsubishi Pajero Sport trunk slave was optimized. - 2335 Nissan X-Trail trunk control command was changed (cars with electric drive). - 2335 Nissan X-Trail, Qashqai, Pulsar keyless unlocking command was changed. - 2417 Mazda 6 Engine blocking was added (engine start blocking), validator buttons (cruise control buttons Set+, Set-, OFF, ON). - 2416 Mazda CX5 Engine blocking was added (engine start blocking). - 2614 Honda Accord Trunk salve was added. - 3122 Hyundai Santa Fe comformt command was optimized, remote engine start by oe remote control was optimized. - 3230 Mohave std.key Central lock and trunk control commands were optimized. - 4219 Renault Koleos Slave was optimized for cars without original remote engine start. - 5119 BMW X5(F15),X6(F16) Webasto control command via CAN3 was added. - 5212 Mercedes Sprinter RPM values were calibrated. BT-systems: - Slave mode for “Program neutral after last door closing” mode was optimized – Code immobilizer (validator) was optimized for “Ask pin code after opening a door” mode for right hand drive cars. - Normally open input of RHM was optimized. ------------------------------------------------------------------------------------ 2018.04.20 Changelog Smart Pro v.143 - Programming menu via GSM bug was fixed - “Time for detecting a radio tag” setting was added for “Prohibit disarming when tag is absent” function ------------------------------------------------------------------------------------ 2018.04.17 Firmware changelog Professional/Elite v 3.18 Smart Pro v 1.42 Light+/Light Pro v 2.53 Mini BT v 2.38 New model codes: - 3126 KIA Picanto after 2017y. - 1136 VW Crafter after 2017y. - 1417 Porsche Panamera after 2017y. - 1122 Audi S7 after 2014y. - 2623 Honda Stepwgn V 2015-2017y. - 5119 Mini Cooper Hatch III (F56) after 2014y. - 2329 Nissan Leaf I (right-hand drive) 2009-2017y. - 2522 Subaru Outback V Re. (BS) start-stop button after 2017y. - Model code for Honda Fit III Hybrid, Honda Vezel Hybrid was changed to 2621 - Model code for Mazda Axella II (BL) 2009-2013y. was changed to 2621 - 3231 Kia Stinger: Simulation of control of original alarm system with folding/unfolding mirrors was added - 3225 Kia Soul: Trunk slave was optimized - 3126 Kia Rio, Hyundai Solaris: Handbrake status for 2xCAN systems was moved from CAN1 to CAN2, a command for switching off the original alarm system (“Comfort” command) was optimized - 3122 Hyundai Santa FE: Switching off light was added to the “Comfort” command, errors of validator buttons was fixed. - 3121 Hyundai I40: a command after remote engine start was changed, trunk slave was changed - 1115 Polo Sedan: Trunk slave was optimized - 1115 VW Amarok: Validator buttons were added: “up-down-left-right” positions of the left joystick on the steering wheel, “OK” button of the right joystick on the steering wheel, left windows regulator “up” first and second position. - 1131 Porsche Macan: : Validator buttons were added: mirrors control buttons "up/down", "rhomb" button on the left side of steering wheel, "ok" button on the right side of steering wheel. - 1417 Audi Q7 (BT-series) Control over hazard lights was optimized - 2113 Toyota LC200: Slave mode was optimized - 2134 Lexus RX450h: Validator buttons were added: windshield blower button, "Auto" button on the climate control - 2111 Lexus ES V (XV40): speed and fuel level was added - 4214 Lada Largus: Bypass of original immobilizer for 21127 engine was added - 1913 Lada X-RAY fuel level in percent (%) was added - 2217 Mitsubishi Mirage: Slave mode was corrected - 3414 Haval H9 2017: Parking status was optimized, control over original alarm system was added, closing windows, unlocking trunk, blocking engine were added, Validator buttons were added: buttons on the gear selector - 1234, 1224, 1221, 1231, 1242 Ford Focus III, Kuga II: Closing windows command was changed - 1224 Ford Kuga2: Ignition status was changed; original alarm system arming/disarming commands were changed, unlocking trunk was changed; engine start and stop via CAN commands were added, slave of original engine start was added. - 1241 Ford Mondeo (std.key) Slave mode was optimized - 1242 Ford Focus3 (sync_edition) Slave mode was optimized - 1241 Ford Mondeo RPM values were calibrated - 1244 Ford Explorer RPM values were calibrated - 2329 Nissan Note (right-hand drive) Blocking engine command via CAN was added - BT-series: “Prohibit disarming when a tag is absent” function was optimized ---------------------------------------------------------------------------------------------- 2018.02.28 Firmware changelog Professional/Elite v 3.16 Smart Pro v 1.40 Light+/Light Pro v 2.49 Mini BT v 2.37 Smart v 1.50 New model codes: - 2143 Toyota bB II (QNC20) 2005-2008 y. - 3231 Kia Stinger I (CK) after 2016 y. - 2914 Geely Atlas (pts keyless) after 2018 y. - 1324 Chevrolet Camaro VI after 2016 y. - BMW G32 model code was changed (old code – 5114, new code – 5119) - 2131 Remote start using original remote control was added. - 4219 Renault Koleos remote start procedure was modified to exclude errors. - 4111 Chevrolet Tahoe slave of original remote start was added. - 2511 RPM status via CAN was optimized. - 1219 Ford Transit mileage and fuel level (%) statuses via CAN were added. - 5119, 5117 Speed status via CAN was added. - 5117 Trunk control was optimized. - 5114 Fuel level (%) via CAN was adapted. - 1131 Porsche Macan Command after remote start was changed. - 1128 Command after remote start was changed. - 1136 Command after remote start was changed. - 1132 Seat Leon Fuel level (liters) via CAN was added. - 3224 RPM values were calibrated - 1617 RR Sport CAN2 Code immobilizer buttons were added: cruise-control buttons "RES", "SET+", "SET-". - 4318 Fiat Freemont Command via CAN was added: "Command before remote start" disarms original alarm system and opens central lock. - 1129 Skoda Octavia A7 slave mode was optimized, "Command after remote start" was changed, driver’s seat heating command was added (“Additional command via CAN”). - 2411 Mazda CX9 slave and central lock statuses were optimized. - 2417 Mazda 3,6 d “Light indication via CAN” was added – triple blink of hazard lights indicators on the dashboard. - 2113 Toyota LC200 10 y. Control over original alarm system via CAN2 was added. - 2117 LC200 CAN1: fuel level (liters), blocking. CAN2: slave, control over original security system, control over central lock were added. - 2135 Lexus LS600h IV restyling (XF40) 2013 y. äîáàâëåíû: : fuel level (liters), blocking via CAN were added, front hood status was optimized. - Remote engine start is prohibited when the front hood is open. - “Comfort” function is prohibited when a door is open. BT-systems: - Support for DI-04, BT-01 modules was added (BT-modem firmware must be updated to 2.07 version). - Remote start using original remote control was optimized. - Active security mode enabling from the app was added. - Control over the central lock from the BT application when ignition is switched on was added. - Disabling siren at night time function was added (disabling period can be adjusted). - The events "When detecting a radio tag", "When losing a tag" from the Time channel settings work in accordance with the 1.8.5 - "Radio tag RSSI level", 1.8.6 -"Radio tag hysteresis". - If the total duration of the signal is set to 3600 sec. in the Time channels settings, the impulse will be continuously applied until the “Disable” event. - Shock/Tilt sensors operation was optimized Professional/Elite: - Incorrect RPM values in the mobile applications was fixed. - Shock/Tilt sensors operation was optimized ---------------------------------------------------------------------------------------------- 2018.01.19 Changelog Professional/Elite v 3.13 Smart Pro v 1.38 Mini BT v 2.35 Light+/Light Pro v 2.48 Smart v 1.49 Added support for: - 1734 Citroen SpaceTourer after 2016y. - 1734 Peugeot Traveller after 17y. - 2141 Toyota Camry (XV70) PTS after 2018y. - 4220 Renault Dokker after 2017y. - 4220 Renault Duster II minimal trim (two-button radio key, diesel, without original remote start system). - 3230 Kia Mohave standard key (3228 – only for PTS cars). - 3712 Ravon Gentra (model code was changed) - 2142 Lexus RX450h (model code was changed, previous code was 2134). 2xCAN connection for immobilizer bypass. - 3219 Kia Quoris remote start using original remote control, engine block via CAN2, validator buttons on the steering wheel (Vol+, Vol-, Cruise Set+/Set-/Cancel) were added. - 2513 Subaru Outback standard key Bypass of original immobilizer algorithm was optimized. - 2124 fuel level via CAN was added (it is displayed in liters) - 2137 fuel level via CAN was added (it is displayed in liters) - 5223 Mercedes E213 doors control algorithm was optimized - 2336 Bypass of original immobilizer algorithm was optimized to eliminate errors - 1136 VW Tiguan slave mode was optimized. - 2515 Subaru Forester, WRX slave mode was optimized. - 4215 RPM status was corrected. - 2335 Nissan Qashqai, X-Trail, Pulsar "Block keyless via CAN" command was optimized. - 2218 Mitsubishi Pajero (keyless trim) Original alarm system control command, keyless and remote control slave were added. - 2134 "ready" status for hybrid cars was optimized (the problem of incorrect remote start at low temperatures was solved). Smart Pro: - Central lock control and comfort function via IMMO-KEY for Mazda was optimized BT systems: - “Automatic start of engine preheater on a schedule function” was added. - 1413,1415 Bypass of original immobilizer learning procedure was optimized. Professional/Elite, BT systems: - shock/tilt/crash sensors were optimized (during remote start). ---------------------------------------------------------------------------------------------- 2017.12.18 Changelog Professional/Elite v 3.11 Light+/Light Pro v 2.47 Smart Pro v 1.35 Mini BT v 2.34 - 2134 Added support for Lexus LS500h after 2017 y. - 5119 Added support for BMW X3(G01) c 2017 y. - 1615 LR Freelander2 statuses via CAN2 were added: brake pedal, handbrake. - 4111 Chevrolet Tahoe CL control commands were changed. - 2321 Comfort command was added. - 2131 Lexus RX Block of original keyless via CAN command was added. - 1733 Peugeot 3008 ignition status was changed, brake pedal via CAN2 was added - 5112 BMW command after remote engine start was added (door opening simulation) - 1513 Volvo XC70 RPM status was corrected. - 1113 VW Tiguan Manual transmission handbrake status was corrected. - 2516 Subaru Forester 2011 (right-hand-drive) slave was optimized. - 1128 RPM status was calibrated. - 2217 Mitsubishi L200 doors statuses were corrected. - 1129 Skoda Octavia A7 slave by door sensors was optimized. - 1136 Skoda Superb slave by door sensors was optimized. - 2113 Toyota LC200 Block of original keyless via CAN command was added. - 2141 Toyota LC200 2017 validator buttons were added: "SET+", "SET-", "CANCEL" (when ignition is switched on); Gearbox selector to the right (when ignition is switched off). - 2141 Toyota Fortuner validator buttons were added: cruise control buttons "SET+", "SET-"( when ignition is switched on), Gearbox selector to the right (when ignition is switched off). - 2112 Toyota Avensis remote engine start by triple press of lock button on the original remote control function was added. - 3227 Kia Optima a validator button was added: button on the gearbox, indicators blinking on the dashboard command was added (CAN2) - 3125 Hyundai Creta indicators blinking on the dashboard command was added (CAN2), engine temperature (CAN2) - 2312 Nissan Teana a validator button was added (button on the gearbox selector – when ignition is switched on), immobilizer indicator blinking on the dashboard command was added. - 2336 Infiniti Q50 a validator button was added (button on the gearbox selector – when ignition is switched on), immobilizer indicator blinking on the dashboard command was added, “warning” sound signal command was added. - 2336 Infiniti Q60 a validator button was added (button on the gearbox selector – when ignition is switched on), immobilizer indicator blinking on the dashboard command was added, “warning” sound signal command was added. - 2321 Infiniti QX50 a validator button was added (button on the gearbox selector – when ignition is switched on), immobilizer indicator blinking on the dashboard command was added, “warning” sound signal command was added. - 2321 Infiniti QX70 a validator button was added (button on the gearbox selector – when ignition is switched on), immobilizer indicator blinking on the dashboard command was added, “warning” sound signal command was added. - 2321 Infiniti QX80 a validator button was added (button on the gearbox selector – when ignition is switched on), immobilizer indicator blinking on the dashboard command was added, “warning” sound signal command was added. - 2337 Infiniti QX60 a validator button was added (button on the gearbox selector – when ignition is switched on), immobilizer indicator blinking on the dashboard command was added, “warning” sound signal command was added. - 1417 Audi Q7 all blinking of all indicators on the dashboard command was added - 4215 Renault Duster II buzzer sound signals command was added, indicators blinking command was added. - 2521 added support for Subaru XV std.key, bypass of original immobilizer via CAN2 was added. - 1415 Audi A4 (2001-2008) bypass of original immobilizer via CAN2 was added (H – orange-black, L-orange-brown). - 2017 Seat Leon II (2005-2012) model code was changed, bypass of original immobilizer via CAN2 was added. - 2018 Seat Ibiza (2008-2015) model code was changed, bypass of original immobilizer via CAN1 (behind the dashboard) was added. - 1018 Skoda Fabia (2006-2014) model code was changed, bypass of original immobilizer via CAN1 (behind the dashboard) was added. - 1413 Audi A1 (2010-2012) bypass of original immobilizer via CAN2 was added. - Professional/Elite turbo timer/ignition support/program neutral algorithm for Toyota/Lexus CAN+RX_TX bypass was optimized. - BT systems (except Pandora Smart), Professional/Elite shock/tilt/crash sensors were optimized. ---------------------------------------------------------------------------------------------- 2017.11.27 Changelog Professional/Elite v 3.10 Light+/Light Pro v 2.46 Smart Pro v 1.34 Mini BT v 2.32 Added support for: - 2416 Mazda Axela II (BM restyling) 2011-2013 y. - 3411 Great Wall DW Hover H3 after 2017y. - 1619 Jaguar F-Pace 2018y. - 2212 Mitsubishi Pajero 4 RPM status was corrected, cruise control buttons: ACC_RES, Coast_SET, ON_OFF, CANCEL were added. - 1619 Land Rover Sport 2017y. Slave of original remote start was added. - 2141 LC200 additional command via CAN was added: heating of front and rear windows. - 1912 Lada Vesta Fuel level via CAN was added. - 2416 Validator buttons were added: on the steering wheel: info_up, info_down, info_center; triple blink of hazard indicators on the dashboard was added. - 3211 Kia Soul std.key brake pedal status via CAN2 was corrected. - 3227 Hyundai Tucson Open CL command was optimized. - 3227 Original alarm system disarm command was optimized. - 1136, 1128 Door opening simulation command was changed. - 5114 BMW X3(F25) closing windows command was optimized. - 3126 Hyundai Solaris CAN2 rpm status was optimized. - 1417 Hazard light control command via CAN was adapted. - 2141 Lexus NX200 Trunk slave was optimized. - 3122 Hyundai Santa FE engine start via original remote control. BT systems (except Pandora Smart): ACC switching off algorithm was optimized to exclude false alarm on the door sensor. Lock doors when movement algorithm was optimized; Shock sensor operation algorithm during remote start was changed Crash detection and tilt algorithm was optimized. ---------------------------------------------------------------------------------------------- 9.11.2017 Changelog Smart (DXL1800L) v 1.47 Improvments in Toyta RX_TX_CAN engine stop algortihm were added. "On finishing remote start/turbo timer/ignition support" event was added. ---------------------------------------------------------------------------------------------- 1.11.2017 Changelog Professional v 3.09 Elite v 3.09 Light+ v 2.45 Light Pro v 2.45 Smart Pro v 1.32 Smart (DXL1800L) v 1.46 Mini v 2.32 Added support for: - 2521 Subaru XV 2018 y. - 2416 Mazda CX9 after 2015y. - 3811 Foton Sauvana after 2017y. - 2611 Honda Vezel after 2013y. - 3220 Kia Ceed (radio-key). "Comfort" and "Command after remote start" contains door opening simulation to eliminate original alarm triggering before and after remote start. - 3227 Hyundai Sonata VII restyling (Start-Stop) 2017y. - 4314 Jeep Commander Rear doors status was corrected - 1129 Skoda Kodiaq Control over original Webasto via CAN was added - 1912 Lada Vesta Original alarm disarming command via CAN was added - 1913 Lada X-Ray Original alarm disarming command via CAN was added, engine start using original remote control was added - 2622 Honda CRV Command before remote start (original alarm disarming) was added - 2315,2321 Nissan Juke Validator buttons were added : lower button on the selector, ïåäàëü ãàçà äî óïîðà - 5119 BMW X5(F15), X5(F16) Validator buttons were added: right window control button on the driver's door, button "4" on the multimedia panel - 5117, 5119 CAN2 Indication was added: double signals on the dashboard (2 types), hazard lights indication on the dashboard, hazard lights indication on the dashboard with sound indication - 2127 Toyota CAN, CAN+Rx_Tx bypass algorithm was optimized - Professional/Elite RMD CH2(+) operation was fixed - Professional/Elite A link to maps.google.com was added when SOS button is pressed BT-series (except Pandora Smart): - “GM” Bypass algorithm was corrected - 2611 Bypass of Honda Vezel was added («Honda New Bypass» with CLONE) - 2611 Bypass of Fit (Start-Stop) was added («Honda New Bypass» with CLONE) - "Arming without sensors (shock/tilt/motion/additional sensors)" function was added. Activation of the function is performed in the Pandora AlarmStudio (1.1.13 item). The function stays active for one arming period. To activate the function, press and hold VALET button for 3 seconds, then arm a car within 30 seconds using any means. The system will arm without sensors. If the car was not armed within 30 seconds after holding VALET button, the car will be armed without sensors automatically ---------------------------------------------------------------------------------------------- 16.10.2017 Changelog Light+ v 2.43 Smart Pro v 1.29 Bypass of original immobilizer of PTS Honda/Acura cars was added: Honda Honda Pilot after 2016 y Honda CR-V after 2015 y Honda CR-V (New) after 2017 y Honda Accord after 2013 y Honda Crosstour after 2013 y Honda HR-V after 2016 y Honda Vezel Honda Feet Honda Feet Hybrid Acura Acura MDX after 2014 y Acura RDX after 2016 y Acura TLX after 2015 y The bypass is available for the systems with IMMO-KEY port. Use "Honda new bypass" and Pandora Clone service. ---------------------------------------------------------------------------------------------- 09.10.2017 Changelog Professional v 3.07 Elite v 3.07 Light+ v 2.42 Light v 2.03 Smart Pro v 1.28 Smart (DXL1800L) v 1.44 Mini v 2.31 Added support for: - 1417 Audi A5 2017 y. - 1417 Audi Q5 2017 y. - 1244 Ford Galaxy 2017 y. - 1319 Opel Zafira 2017 y. - 2337 Infiniti Q60 2016 y. - 2217 Mitsubishi Mirage (start-stop, right-hand drive) 2012y. - Hyundai Genesis III 2017 y. model code was changed to 3128 - Toyota Prius 50 model code was changed to 2141 - Renault Kadjar model code was changed to 4219 - 4217 Renault Clio Added bypass of original immobilizer via CAN - 4219 Renault Kadjar Added bypass of original immobilizer via CAN - 2333 Nissan Pathfinder(keyless) Added comfort function for driver’s window - 2121 Toyota RAV4 acceleration pedal as a validator pressing inquiry was changed: the button is active when Parking or Handbrake is activated. - 2141 Toyota Prius 50 Added validator buttons: cruise control buttons "up" and "down" - 1911 Lada Granta, Kalina Parking status was adapted - 5119 BMW X5(F15), X6(F16) Added validator buttons: "driver’s window regulator", "ÎÊ" button on the right side of the steering wheel - 4219 Renault Koleos Starter control procedure via CAN was optimized - 4217 Renault Kaptur Added command for ACC switching off after remote start. - 4219 Renault Kadjar Added fuel level, Neutral status of mechanical gearbox (set “Robotic” transmission in the settings) - 4217 Renault Clio Added control over original alarm system - 4217 Renault Clio, Kaptur Tachometer values was calibrated - 6111 SsangYong Actyon Handbrake status was optimized - 3224 Kia Cerato (keyless) Parking status was changed - 1313, 1319 GM Tachometer values was calibrated - 3227 Tachometer status error was fixed, Closing CL command was optimized - 1128 Added command after remote start (door opening simulation) - 3122 Hyundai Santa FE original alarm system disarming command was optimized For BT systems (except Smart) the next functions were added: - 2337 Infiniti QX60 Blocking of original keyless via CAN (the original alarm system can trigger when the command is activated) - 2321 Infiniti QX80 Blocking of original keyless via CAN - 2321 Infiniti QX70 Blocking of original keyless via CAN - 2321 Infiniti QX50 Blocking of original keyless via CAN - 2336 Infiniti Q50 Blocking of original keyless via CAN (the original alarm system can trigger when the command is activated) - 2336 Infiniti Q60 Blocking of original keyless via CAN (the original alarm system can trigger when the command is activated) - 2336 Infiniti Q70 Blocking of original keyless via CAN - 2335 Nissan X-Trail, Qashqai Blocking of original keyless via CAN - 2348 Nissan Murano Blocking of original keyless via CAN - 2333 Nissan Pathfinder(keyless) Blocking of original keyless via CAN - 2321 Nissan Juke (keyless) Blocking of original keyless via CAN - 2141 Toyota Prius 50 Added functions via CAN: "3 double signals of the dashboard " (Time channels - Action – sound indication via CAN); "3 flashes of radar switch-off lamp" (Time channels - Action – light indication via CAN) - 2321, 2336 model codes Commands of closing windows and closing the hatch via CAN was separated. - “GM” bypass algorithm was corrected - Light+ The CAN2 outputs were freed from the CL control logic in the factory settings. - Professional, Elite Added a short call after disarming ---------------------------------------------------------------------------------------------- 22.09.2017 FW changelog Professional v3.06 Elite v3.06 Light+ v2.39 Smart Pro v1.25 Mini v2.30 Light v2.01 Changing by CAN: - 3226 Kia Sorento Prime optimized slave mode - 3126 Kia Rio, Hyundai Solaris optimized control commands, excluded the “Fuse on” error. - 3126 Kia Rio, Hyundai Solaris adjusted RPM status via CAN2 - 5117, 5119 adapted blocking command for B48, B58 engines. - 2111 Toyota/Lexus added commands for enabling/disabling original radio channel via CAN (Light+, Smart PRO) - 2115 Toyota/Lexus added commands for enabling/disabling original radio channel via CAN (Light+, Smart PRO) - 2141 Toyota LC200, Lexus LX570 comfort command is divided into: closing windows, folding mirrors, closing sunroof (Light+, Smart PRO) Bypass functions: Added function bypass of original immobilizer for VW, Skoda, Audi (works only with Pandora Light+ and Pandora Smart Pro systems): - Audi Q3 (2011 - 2016 y.) is moved to 1427, model code (CAN2 connection is performed on the dashboard) - Skoda Octavia FL (2009-13 y.) is moved to 1013 model code (CAN2 connection is performed on the dashboard) - Skoda Yeti (2009-16 y.) is moved to 1013 model code (CAN2 connection is performed on the dashboard - Skoda Fabia II (2006-14 y.) is moved to: 1015 model code, (CAN2 connection is performed on the dashboard) 1018 model code, (bypass is performed via CAN1) - VW Jetta before 2015 y. (model code 1117,1127)(CAN2 connection is performed on the dashboard) - VW Multivan T5, Caravella T5 (model code 1115) (CAN2 connection is performed on the dashboard) - VW Polo Sedan before 2015 y. (model code 1115) (CAN2 connection is performed on the dashboard) - VW Polo Sedan before 2015 y. (model code 1118) (CAN1 connection is performed on the dashboard) - VW Tiguan before 2016 y (model codes 1113,1117)(CAN2 connection is performed on the dashboard) - VW Multivan T6, Caravella T6 are moved to 1138 model code, (CAN2 connection is performed on the dashboard),also added control over engine preheater command. Connection and learning procedure is performed in accordance with installation manuals. NOTE for Light+ systems: To bypass the original immobilizer, CH4 and CH2 (CAN2) channels should to be freed from the assigned logic ("outputs" settings”). Description of bypass procedure: Select the desired model code. Enable 2.3.1 "Enable bypass when engine is running" in the "Original Immibilizer bypass" settings Select 2.3.3 "Bypass via CAN" option. Enter programming level ¹17. LED will light green. For PTS cars: Switch on the ignition (press the Start/Stop button) - LED will light orange; Wait until LED will turn green and the siren will sound a beep; Switch off the ignition (press the Start/Stop button) Press VALET button. Exit programming mode. Switch ignition on and off to exit programming mode (press the Start/Stop button twice). For Key cars: Insert the key in the ignition lock, switch on the ignition - LED will light orange; Switch off the ignition and pull the key out of the ignition lock. Wait until LED will turn green (about 30 sec.); Insert the key in the ignition lock again - LED will flash green fast and after that it will light green and the siren will sound a beep; Switch off the ignition and press VALET button; Exit programming mode. Switch ignition on and off to exit programming mode. Connect the system to PC, run AlarmStudio and make CLONE procedure. Light+, Pandora Smart: - Optimized accelerometer data processing, excluded false sensors triggering. - Fixed error of automatic doors locking on movement function. ---------------------------------------------------------------------------------------------- 13.09.2017 Professional v3.05 Elite v3.05 Light+ v2.37 Smart v1.42 Smart Pro v1.23 Mini BT v2.29 - 3711 added support for Ravon R3 Nexia - 1315 added support for Ravon R3 Nexia Ravon R2 - 1319 added support for Ravon R3 Nexia Ravon R4 - 2321 Nissan Juke(Start-Stop) Changed Parking status - 2329 Nissan Juke right steering wheel added bypass of original immobilizer via CAN - 2141 Toyota LC200 changed Tachometer via CAN status - 4215 Renault Logan2, Sandero2, Duster2 added Original Alarm System control command, optimized Fuel level via CAN (in liters) - 2622 Honda CRV 2017 a. optimized slave mode - 5217 Mercedes C-class, S-class, GLC-class added fuel level via CAN - 5223 Mercedes E-class added fuel level via CAN - 3126 Added Kia Rio (Radio-Key, Start-Stop) 2017y. - 1733 Added Peugeot 3008 2016y. - 2932 Added Lifan Murman 2017y. - 2612 Honda Pilot. Added hood status - 1914 Lada NIVA 4x4 factory calibration of fuel level for analog connection is implemented - 4219 Renault Koleos Optimized Slave, added bypass of original immobilizer via CAN - 2313 Nissan Navara Optimized rpm status, added CL control commands, added bypass of original immobilizer via CAN Professional, Elite, Light+, Smart Pro - added CL control via IMMO-KEY2/LIN for Mazda 3 (2417), 6(2417), CX-5(2416) Note: IMMO-KEY2 channel is used for the systems with IMMO-KEY port, LIN OUT is used for the systems without IMMO-KEY port. Smart Pro - added a short call on the "Arming" event Smart Pro - changed logic of the ignition when connecting in series (incut) Note: if "Switch on analog NO/NC blockages only when movement starts" is enabled, then ignition can be enabled when movement doesn't start (it applies to the Anti-Hijack mode) Professional, Elite - optimized accelerometer data processing (sensitivity of a shock sensor was increased) Light+, Smart Pro, Mini BT - optimized accelerometer data processing (possibility of false shock sensor alarm events were decreased) Light+, Smart Pro, Mini BT - if there was a power reset of a system, automatic starts would be prohibited until the next arming (Remote starts will remain allowed). -------------------------------------------------------------------------------------------- 20.07.17 Light+ v2.30 Light v1.61 Smart v1.40 MiniBT v2.25 - 2622 added support for Honda CRV 2017y. - 4219 added support for Renault Koleos - 1117 added support for Seat Alhambra (added disarming condition by sliding doors). - 2134 Lexus NX300h. Added control over original security system (from 2141 model code). - 2321 Optimized Central lock control commands. - 3227 Hyundai Tucson. Added fuel level via CAN2. - 1115 Adjusted disarming in slave mode for Skoda Rapid, Fabia RS, VW Transporter T6. - 1244 Ford Explorer. Changed slave mode. - 3211 Kia Sorento. Added a command after remote start via CAN. - 1619 LR Sport 2017. Fixed trunk control in slave mode, added central lock control commands. - 5211 Optimized trunk status via CAN and trunk control in slave mode. - 2134 Added original Keyless blocking commands. -------------------------------------------------------------------------------------------- Professional Elite Light+ Light - Added immobilizer bypass for GM group cars with a key CHEVROLET: CAMARO Automatic (since 2010) CAMARO Manual(since 2010) CRUZE Automatic (since 2010) CRUZE Manual(since 2010) ORLANDO Automatic (since 2011) ORLANDO Manual(since 2011) COBALT Automatic (since 2013) COBALT Manual(since 2013) AVEO Automatic (since 2012) AVEO Manual(since 2012) OPEL: INSIGNIA Automatic (since 2009) INSIGNIA Manual(since 2009) MOKKA Automatic (since 2012) MOKKA Manual(since 2012) ASTRA J Automatic (since 2013) ASTRA J Manual (since 2013) ASTRA K Automatic (since 2016) ASTRA K Manual(since 2016) MERIVA Automatic (since 2010) MERIVA Manual(since 2010) - MiniBT Added a delay of doors triggers alarm when they trigger without tag presence -------------------------------------------------------------------------------------------- Professional Elite Light+ Light Smart Mini BT - 1241 Added support for Ford Tourneo Custom 2017y. - 5119 Added support BMW 5(G30) 2016y. - 1129 Added support Skoda Kadiaq 2017y. - 3126 Added support Kia Picanto III (start-stop) 2017y. - 2335 Added support Nissan Pulsar VI 2014y. - 2121 Added support Toyota Prius IV (XW50) 2017y. - 2416 Added support Mazda CX-3 2017y. - 1513 VOLVO XC70 Optimized Arming in slave mode. - 1619 LR Sport 2017y. Optimized step-by-step disarming in slave mode . - 3121 Hyunadai i40 Added engine blocking via CAN2. - 1213 Ford S-max, Mondeo Optimized slave mode. - 3122 Hyundai Santa Fe Added validator buttons on the driver door: "front right window up", "rear right window up". - 2321 Infiniti QX80 Added comfort function. - 2321 Infiniti QX50, QX70 Added comfort function and sunroof closing. - 2336 Infiniti Q50 Added comfort function. - 2336 Infiniti Q70 Added comfort function and sunroof closing. - 5114 BMW 5(F10) Added comfort function, control over original security system - 3225 Kia Soul(std.key) Added comfort function, door opening simulation command, door opening simulation after remote start command - BT series: - Optimized Bluetooth operation when changing system settings via mobile phone. - Added central lock control using Bluetooth tag when ignition is switched on. - Added original Keyless blocking/unlocking commands for TOYOTA cars (it is implemented using time channels). The function is available for 2114,2121,2141 (Rav4, Camry, Corolla, LC200, LC Prado, Highlander) -------------------------------------------------------------------------------------------- Professional Elite Light+ Light Smart - 1244 Ford Explorer Changed slave mode, ignition status - 5119 BMW X5/6 Changed slave mode, fuel level via CAN, added engine temperature via CAN - 5117 added engine temperature via CAN - 4217 Renault Kaptur Optimized original security system disarming command. - 2121 Toyota RAV4, Camry Added validators buttons: acceleration pedal, cruise control buttons "+", "-" - 2337 Infiniti QX60 Changed central lock control commands, added comfort function. - 3227 Kia Sportage Changed ACC switching off after remote start command. - 2416, 2417 Added fuel level (updates only on speed or remote start), speed via CAN. - Optimized immobilizer bypass for Nissan, Infiniti cars eliminated false triggers of original security systems.