The Pandora Truck is the most modern security-telemetric system for the vehicles with on-board voltage of 24 V. It is built on a new energy efficient platform and has super-fast modem which supports 2G/3G/4G (LTE) GSM networks, Bluetooth 5.0 and GPS/Glonass reciever.
Built-in 4G interface
4G connection expands a zone where you can control the system and receive alarm and service notifications in the cellular network coverage area. You can control your vehicle from anywhere.
Integrated GPS/GLONASS receiver
A built-in receiver has low power consumption, high sensitivity and minimum response time after ‘cold’ and ‘warm’ start. It ensures reliable tracking under conditions of low GPS/GLONAS signal level and urban areas.
You can control your system using Bluetooth mobile application (without GSM connection). Bluetooth protocol allows you to install additional wireless sensors for controling the doors and the temperature of the truck body.
A new remote control D-043T has a modern multichannel jam-resistant 868 MHz radio link with the LoRa modulation. This provides a reliable connection at a very long range and allows you to monitor vehicle state at a record distance in a very noisy environment.
Miniature Bluetooth tag is included in the system set. The tag has a button for arming/disarming. Bluetooth interface allows to implement a reliable Hands Free function with adjustable operating distance.
Base unit has 4 built-in powerful relays for engine blocking and remote engine start implementation.
Innovative electronic components and special power saving algorithms allow to reduce system power consumption to a record low level.
Modern dynamic dialogue AES encryption with 128-bit keys guarantees impossibility of electronic hack and theft.
In a addition to a traditional CAN/LIN interfaces the base unit is equipped with a RS-485 interface for connecting of additional fuel sensors.
- Base unit DXL 5200L with master-PIN card – 1
- Immobiliser tag BT-780 – 1
- Main control remote with LCD (D-043T) – 1
- Piezo siren PS-330 24V – 1
- Cable with LED/VALET button – 1
- External temperature sensor – 1
- Main cable of the base unit – 1
- Fastening kit – 1
- Manual and wiring diagram – 1
- Packaging – 1